Item Unit 80 Injection Unit Screw Diameter mm 30.0 35.0 40.0 Screw L/D Ratio Ratio 24.5 21 18.4 Shot Weight(PS) g 98 133 173 oz 3.4 4.7 6.1 Injection Pressure bar 2613 1920 1470 Injection Rate cc/sec 78 106 138 Plasticizing Capacity kg/hr 43 64 96 Screw Speed rpm 295 295 295 Injection Stroke mm 150.0 150.0 150.0 Injection Speed cm/sec 11.0 11.0 11.0 Clamping Unit Clamp System ton 80 Clamp Force ton 6.76 Clamp Stroke mm 400 Max. Mold Height mm 150 Min. Mold Height mm 550 Platen Size (H¡¿V) mm 500-500 Tie-Rod Space (H¡¿V) mm 340-340 Ejector Stroke mm 90 Ejector Force ton 2.6 Open Speed mm/sec 600 Colse Speed mm/sec 766 General Pump Motor kw 15 Heater Power kw 5.8 Total Wattage kw 20.8 Pump Capacity §¤/min 65